Australian Made
Designed and made here for the vehicles we know and use.
Australian Made for LandCruiser 300 Series
LandCruiser 300INFINITYPowerDeck Systems
Modular storage and integrated 12V power, built for your LandCruiser 300.
Easy DIY fitment
Vehicle-specific systems designed for straightforward installation.
Delivered nationwide
From our Adelaide workshop to your door across Australia.
See the system work
CLICK IN. CLICK OUT.
This video shows exactly how INFINITY modules click in and click out. Start with the vehicle-specific platform, then lock in the drawer, High Deck Slide and side wings that suit the trip or the workday.
- Remove or refit modules in seconds
- Keep a flat deck to rear trim level
- Build the layout around how you use the vehicle
Choose your starting point
BUILT FOR YOUR LC300
Start with INFINITY, then add storage and power as you need it.
Build a complete system
BUILD YOUR OWN KIT
Choose your vehicle, then build your complete INFINITY system with the floor, drawers, slides, wings and power options that suit you.
Build Your Own Kit
The starting point for INFINITY
INFINITY FALSE FLOOR
Start here. The vehicle-specific, clean flat platform stays in place while you add modules as you need them.
See False Floor
Most popular
INFINITY SIGNATURE KIT
INFINITY modules are available separately, but our range of kits makes your selection easy.
See INFINITY Kits Designed and made in Adelaide
Power and accessories
POWERDECK & POWERED ENHANCEMENTS
Each component is fitted below the INFINITY floor, with the matching wing fascia putting the controls where you can reach them. Start with the power you need and add air or 240 volt capability at any time.
Battery system
POWERDECK
Choose the integrated battery system that suits the way you travel. PowerDeck fits below the INFINITY floor while the rest of the storage remains fully click-in, click-out.
Powered Wing
Gauge, USB and Anderson outlet.
Essentials Powered Wing
Available with Alpha 105 and Alpha 210.
Specifications And Downloads
| Specifications | Alpha 105 | Alpha 210 |
|---|---|---|
| Battery | 105 Ah LiFePO4 / LFP | 210 Ah LiFePO4 / LFP |
| Nominal Voltage | 12.8 V | 12.8 V |
| Nominal Energy | 1.344 kWh | 2.688 kWh |
| Cells | 4 × EVE LF105 · 4S1P | 8 × EVE LF105 · 4S2P |
| Charging | REDARC BCDC Alpha50 (50 A hardware), configured to 40 A; DC and solar inputs. | |
| Continuous / Peak Discharge | To Be Confirmed | To Be Confirmed |
| Maximum Selectable Inverter | 2,000 W | 3,000 W |
| Complete Floor Weight · Prado 250 | 33.2 kg | 41.1 kg |
| Complete Floor Weight · LC300 / MU-X / Everest | 36.3 kg | 44.2 kg |
Complete-system discharge ratings are to be confirmed. A BMS component rating is not the continuous output rating of the complete PowerDeck.
Air on board
ARB COMPRESSOR MODULE
Add an ARB brushless single or twin compressor below the floor. The matching right-hand air fascia provides the switch and air outlet at the rear of the vehicle.
ARB Air Power Wing
Compressor switch and air outlet in the matching fascia.
Specifications And Downloads
| Specifications | Single | Twin |
|---|---|---|
| Model | CKBLA12 | CKBLTA12 |
| Input | 12 V DC | 12 V DC |
| Duty Cycle | 100% | 100% |
| Maximum Current | 45 A | 90 A |
| Airflow At 0 / 29 PSI | 4.59 / 3.10 CFM | 9.18 / 6.20 CFM |
| Dimensions (L × W × H) | 140 × 210 × 90 mm | 210 × 280 × 100 mm |
| Approximate Kit Weight Including Loom | 4.8 kg | 7.5 kg |
240 volt power
INVERTER MODULE
Fit an inverter below the floor when you need it, then use the matching right-hand inverter fascia for the remote switch and 240 volt socket.
Inverter Wing
Remote switch and 240 volt power socket.
Specifications And Downloads
| Specifications | 1,000 W | 2,000 W | 3,000 W |
|---|---|---|---|
| Continuous / Surge Output | 1,000 / 2,000 W | 2,000 / 4,000 W | 3,000 / 6,000 W |
| Input | 12 V DC | ||
| AC Output | 230 V / 240 V AC · 50 Hz | ||
| Dimensions (L × W × H) | 342 × 173 × 76 mm | 442 × 220 × 92 mm | 482 × 220 × 92 mm |
| Approximate Kit Weight Including Loom | 3.2 kg | 5.8 kg | 7.9 kg |
Australian Made INFINITY storage
Click in. Click out.
FRIDGE-READY INFINITY MODULES
Choose the fridge height that suits your setup, then pair it with the matching drawer and wing kit for one flat, usable surface right across the rear.
Medium-height module
30 LITRE DRAWER FRIDGE
Built for 30 litre drawer fridges, including Kings, Dometic, Engel and similar-sized units. The fridge module, matching drawer and wings click into the INFINITY false floor individually, making it easy to configure or change later.
One flat surface across the top, with a matched-height drawer and wing kit.
See Fridge Module Options
High-height module
40 LITRE EVAKOOL FRIDGE
Designed around the Australian Made Evakool 40 litre fridge, this higher system uses a one-piece click-in fridge-and-drawer module between matching-height wings. It remains part of INFINITY while giving the taller fridge a clean, level layout.
One flat surface across the top, with the fridge hutch and drawer clicking in as one module.
See Fridge Module OptionsBuilt by Lawson Automotive
LC300 GALLERY
Real LandCruiser 300 systems, built in our Adelaide workshop.
Designed and made in Adelaide
YOUR LC300. YOUR WAY.
Tell us how you use the vehicle and we will help map the right storage and power system. We supply Australia-wide, with freight confirmed before your order proceeds.